Along with correct use, correct cleaning and maintaining will help to make sure that your juicer will work fine for you in many coming years. My honest article today will walk you through steps to clean and maintain your juicer properly; the tips to do this with more ease are also mentioned. Keep reading for details!
There are currently three mains types of juicers on the market and there are some slight differences in how often they should be cleaned and maintained. Citrus juicers which are designed to juice citrus fruits, such as grapefruits, oranges are quite easy to clean. Most of their parts are dishwasher-safe and the entire machine is easy to take out. On the other hand, juice extractors which are able to deal with a wide range of fruits and vegetables, are a little bit more complex to clean but still quite straightforward. Most of their removable parts can be cleaned with dishwashers. But you are required to be careful when cleaning the shedder or grater component since it has sharp cutting blades. Finally, wheatgrass juicers which come with masticating single gear and triturating twin gear machines are the most effective and flexible and the most complicated of the three types to clean as well. The built-in interlocking gears are a little more difficult to take out for cleaning though.
Before starting your cleaning process, studying the manual giving in the full packages so that you will be clear about information which is specific and helpful to your appliance. Plus, be sure that you know which parts are removable and which are not. This is different among the models.
And it’s time to check the basic steps to clean a standard juicer and some tips to to the process easier.
Step 1: Turn off the juicer
Yeah, before starting to take out and clean parts of your juicer with your hands and tool, make sure that it is off, then put the plug far away from the power outlet.
Step 2: Take out the machine
The first part to take out is the pulp container, then remove every pulp inside.
Speaking about pulp, you can reuse it for another recipe, take advantages of it to make compost for your flower garden, or simply throw it away. As you finish removing the pulp, check the container again whether there is any pulp remained. If there is any, use a spoon to scoop this out. Note that as you disassemble the filter basket, you hold it on the sides in order that you won’t get yourself cut due to on the sharp blades on the bottom.
Step 3: Wash all of the parts
Wash all removable parts which are in contact with the juiced ingredients, using a water facet and hot soapy water. Alternatively, you can put the parts in a sink of soapy hot water for a while. As you finishing rinsing the parts, let them air dry.
Step 4: Wash dishwater-safe removable parts with a dishwasher
Yeah, place all removable parts which are dishwasher-safe into your dishwasher. Remember to check your manual to see which parts are dishwasher-safe and which should only be put on the top rack. In case you find that the dishwasher is not good at reaching parts, then you can try using a small pipe cleaning brush to do the work.
Step 5: Clean the motor base
Clean the motor base, using a clean, damp cloth or paper towel. Remember to clean thoroughly around the top which has the locking mechanism. This will claim that this area will never become sticky and locked up. Never immerse the part in water or any liquid and do not clean it with a strong water stream as it is the places of many electric parts which are sensitive to hard jets of water.
Step 6: Clean the filter basket
Many machines are designed with a nylon washing brush for cleaning certain parts. This is especially helpful to clean filter baskets which are available in many units and make sure that you don’t get cut when washing the filter basket. The filter basket and feed chute includes a sharp blade as well as small sharp teeth which are to process and cut ingredients as the machine is juicing. SO be always careful or you will get cut with these sharp blade and teeth.
Step 7: Eliminate tough food and stains with lemon juice
If any holes in the filter basket are blocked or difficult-to-remove debris in other parts, then try soaking them in hot water of 10% lemon juice. Moreover, juiced ingredients of strong colors can make some plastic parts discolored if you do not wash the parts after using. And lemon juice soaking method can work in this case.
Step 8: Reinstall the unit
As long as all of parts are dry, put them back together. Then keep the juicer in a clean dry area until you want to use it.
It’s recommended placing a small trash bag or a freezer bag into the pulp container to pick up the pulp. This is helpful because you then just have to take out the bag which consist of all the pulp and do not have to clean the real container.
Here are proven steps to clean and maintain your juicer. They are clear and easy to follow, right? SO make use of them so that you will always have your juice work fine, regardless of how long have you used it.